Bike is at my place in northern Maine & NOT AVAILABLE FOR ANY LOCAL PICKUP.
Offering my Boulder CO frameset for someone into Vintage mtb builds.
20.5" ctc or 52 cm for 6 ft & taller
21 7/8" ctt seatube
23 5/8" toptube ctc
1" headtube 123mm tall
68mm bb shell
130mm rear axle spacing
100mm frt axle spacing
132mm measured stem reach
Top pull cable routing & 28.6mm clamp frt derailleur for standard early mtb tubing req'd
Rr tire clearance at chainstays 2.52"
Frt tire clearance in fork 3.5"
Unknown year model frame with beautiful wishbone seatstays & plenty of paint chips &patina from its life in the Rockies.The patina & vibrant aqua paint is what initially attracted me to this frame.It tells a nice story of it"s life.When KHS touted Race proven in the USA on their chainstays...they meant race Proven in the USA.
KHS marketing materials are extremely thin for reference,but having bought a new KHS Montana Comp in 1992 w a catalog for a few clues and followed them through the years w online history as much as possible...my sense due to the wishbone stays & AVR tubeset is it was surely built in Tiawan in the early to mid 90s... possibly by the same framebuilding contractor that Ritchey used due to the stays that were a thing in the marketplace in the 90s w some brands.
Bike has standard size tubing everywhere except a cool teardrop shaped downtube that comes to a very sharp point on its underside visible in my last photo showing where the rocks have blasted the paint away on the frt half of bb shell almost totally, rendering the serial number hard to read. Bottom of downtube is also ovalized nicely for the bb shell junction area to eliminate flex there and give a feel of rocketing forward with no power loss when standing pedaling hard. The ealy downtube decal font and nice aesthetics of the shaped downtube are my favorite features of this frame.
Threads are chased &good on the 68mm bb shell.I installed a new Shimano cartridge bb of whatever length was correct (I cant recall) for the Shimano Mountain LX Crankset.Crankset has unusually good condition chainrings.
The 92 Rock Shox Mag 20(a steel blue-grey metallic)has been serviced by a pro wrench at the shop I use who is good w vintage forks.It has been fully disassembled,cleaned,lubed, checked for air sealing,and holds air beautifully performing as it should.Removed the rubber stanchion covers cuz I don't like them,but can provide them if you ask.I was also attracted to the patina on fork w it's yellowed usa flag,ancient serial number,& cool looking adjuster dials atop fork legs that look like vintage 35mm camera stop settings graphicly.
RELATED MTB HISTORY OF INTEREST:
Rock Shox developers didn't use a sequential numbering system for product releases & upgrades, so it can be a little confusing w their model's timelines.This mag 20 came next after the famous Mag21 that was used by so many racers in the beginning.It was introduced in 92 as an answer to different priorities that racers were asking for.Technically RS & racers categorized the Mag21 as a downhill oriented fork & racers wanted a slightly different design.
(This Mag21 intent seems laughable now by today's standards, but that was the state of early frt sus technology then).
Has a Kore black ano alum faded 1 1/8" threadless stem (25.4 bar clamp)w a extremely faint blue tone to it from sun that doesn't show much in pics over a 1" to 1 1/8 short alum stem extension inside the 1"threadless steerer tube of the Mag20 w a star nut inside it. 1st gen dia compe Aheadset 1" threadless hs has been cleaned,serviced & is adjusted properly.Was a huge deal in mountainbiking when Cane Creek in NC purchased all of Dia Compe USA's inventory and assets just as they had released the first threadless Aheadsets...and They continued on as Cane Creek cranking out top quality parts to present day.
I did not remove the seatpost (which is fully functional)or the saddle(even though there is a small tear on its rt rear as is typical of one this age)because I liked the patina of it,matching turquoise logos,and it looks like it might have manganese rails.I'm not sure though.
Many chips,scrapes and scratches typical of a 30 yr old race frame, but no structural damage or dents.
You get what you see in the photos on the bike.
Frt canti brake bridge booster(to give more solid feeling frt braking downhill and help fork legs from moving independently of each other)is of good quality by a unknown maker & has nice adjuster screws designed in it going horizontally toward the post slots...to get the tension involved on all parts perfect.I'm including 3 sets of my stainless flanged head hex screws of 25,30&35mm lengths in pics to allow you to use whatever length tube shaped alum spacers you source to go between the frt of caliper arm & booster on the brakepost.
Will be packed professionally & You must be availble or your agent for a UPS signature during business hours if you push the button here.
Allow 5 business days for sure for me to get it shipped as I operate in a remote area and have a hard time getting places during bus hrs.
AUCTION TERMS
WILL SHIP ONLY TO LOWER 48 US STATES
Sorry, no shipping to AK, HI, any provinces, islands, territories, or other countries.
I try to take many angles of clear photos and the photos are the primary description so you will get exactly the item pictured and no returns accepted.
Please be sure of fitment before pressing the button or contact me for advice if unsure.
Plan on 5 BUSINESS DAYS time
for me to get to the shipping agent for shipping as I live in a remote area and have a hard time getting to the places during open hours. Sometimes I can get it out sooner if schedule allows.
Prices on everything have gone insane due to Covid and production slowdowns at bike parts factories have made certain parts scarce for me lately, so I try to keep my prices affordable so buyers feel like they are getting A good value for the buck like I want to feel.
Please check out my Great Feedback as a Seller and buy with confidence and check out my other parts & items for sale when I have them up.
Thankyou for looking