[DESCRIPTION IS CURRENTLY AN INCOMPLETE DRAFT ] A couple of years ago, some of my mountain bike pals and I started wondering about why our Shimano MTB SPD pedals were all double-sided... [MORE TO BE ADDED] We started converting some dual-sided MTB SPD pedals to single-sided. (We've been calling them the SS/U for "SINGLE-SIDED/ULTRALIGHT"). We've learned a LOT about how to do this properly over the past year or two. Our process is, essentially to carefully remove all the plates, screws, springs, latches etc. on the "bottom" of the pedal. After that each pedal now has 4 threaded holes on the bottom (more or less). We found these open, threaded holes to be a little problematic, so we use a plastic/nylon, threaded insert - made in Germany! - to plug each of these holes. [MORE TO BE ADDED] It was really easy to become accustomed to using these single-sided pedals. I mean, using an SPD pedal ALWAYS requires one to spin the pedal around to a roughly horizontal position to clip-in anyway, right? Not only were these pedals something like 50-100g lighter, but they seem to shed the mud and dirt BETTER than the dual-sided originals! There's no second binding blocking/holding the mud and dirt int the pedal Eventually friends of friends started asking for these, so we thought "Hey, why don't we sell these on Pricetronic?"... [MORE TO BE ADDED] Some notes: (a) If you really LOVE dual-sided Shimano SPD MTB pedals and/or are not sure that these single-sided pedals will work for you, PLEASE don't buy these! We understand that these are NOT for everyone! (b) The remaining binding/clip-in side, top of the pedal is UNchanged. We leave this untouched, exactly as it came out of the Shimano factory. If you've been using Shimano SPD pedals, you already know how to set, adjust, and use these. Your existing cleats - SM-SH51 or SM-SH56 - are still compatible with these pedals. (c) The spindle/axle is the current XT/XTR (PD-M8000 / 8020 / 8100 / 9000 / 9020 / 9100 / 9120) style: the pedals are installed onto the cranks with an 8mm hex wrench (NOT a 15mm pedal wrench).